Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 42
If the network scanner option is installed, SELECT DESTINATION TYPE
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Programming Auto-Dial Numbers 3 Press START/ ENTER . Make sure that SET is selected. DESTINATION SETTING 1=SET 2=CLEAR 4 Press START/ ENTER . DESTINATION SET PRESS RAPID OR SPEED 5 To program a Rapid Key number, press the Rapid Key that you wish to use. (To select Rapid Keys 40 through 59, flip up the Rapid Key overlay.) SPEED DIAL To program a Speed Dial number, press and then enter the number that you wish to use ("1" to "100" on the FO-DC500/525, or "1" to "200" on the FO-DC600). (If you enter less than three digits, press START/ ENTER to complete the entry.) 6 If the network scanner option is installed, SELECT DESTINATION TYPE will appear in the display. Make sure that "FAX" is selected (press or if needed), and then press START/ ENTER . (To program an e-mail address in an auto-dial number, see page 90.) 7 Enter the fax number by pressing the numeric keys (maximum of 60 digits including pauses). • To clear a mistake, press DEL . • If a pause is required between any of the digits to access a special service REDIAL or an outside line, press (two seconds per pause). The pause will appear as a hyphen. Several pauses can be entered in a row. 8 Press START/ ENTER . 40