Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 191

Print Hold Print Hold The Print Hold function is used to hold all received faxes in memory instead of immediately printing them out. To print the faxes, the programmed Print Hold code must be entered. To use the Print Hold function, program a Print Hold code and then turn on the Print Hold function as explained in the following sections. Programming the Print Hold code Follow the steps below to program a Print Hold code. 1 Press MENU and then . • Make sure that PRINT HOLD is selected in the display. Display: MENU MODE 6:SERIAL POLLING MODE 7:MEMORY POLL MODE 8:NETWORK SETTING 9: PRINT HOLD 2 Press START/ ENTER and then or until PRINT HOLD CODE SET is selected. PRINT HOLD 1:PRINT HOLD DATA PRINT 2:PRINT HOLD CODE SET 3:PRINT HOLD CODE CLEAR 3 Press START/ ENTER . 4 Press the numeric keys to enter the desired Print Hold code (4 digits). 5 Press START/ ENTER . • The machine will print out the Print Hold code for your records. • In the event that you forget the code and have kept no record, contact your Sharp dealer. 6. Special Functions 189