Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 172
Timer Operations
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Timer Operations Timer Operations The Timer function allows you to store a fax job to be performed automatically at a specified time. Up to 59 timer jobs can be stored at any one time, and the time of each can be specified up to a week in advance. You can use this function to take advantage of lower off-peak rates without having to be there when the operation is performed. ♦ The timer function cannot be used for e-mail transmissions. ♦ The DOCUMENT key cannot be used for a timer transmission. Initial procedure To store a timer job, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific job you want to store (see the following pages). 1 TIMER Press X/> . (Flip up the Rapid Key overlay if it is down.) Display: TIMER MODE 1=SET 2=CLEAR 2 Make sure that "SET" is selected and then press START/ ENTER . TIMER SET 1:SEND MODE 2:BROADCAST MODE 3:CONFIDENTIAL TX MODE 4:POLLING MODE 5:SERIAL POLLING MODE 3 Press or to select the desired operation and then press START/ ENTER ). Note: "CONFIDENTIAL TX MODE" stands for "confidential transmission mode". 4 Enter a two-digit number for the hour ("01" to "12") and a two-digit number for the minute ("00" to "59"). 170