Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 209
Setting 20: ANTI-JUNK FAX, Setting 21: ALARM VOLUME, Setting 22: DIAL MODE, Setting 23: QUICK ON-
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Optional Settings Setting 20: ANTI-JUNK FAX Select ON to block reception from fax numbers entered in the Anti Junk Fax List. Select OFF to allow reception from all numbers. Press or to make the selection and then press START/ ENTER . ♦ Initial setting: OFF Setting 21: ALARM VOLUME This sets the volume of the beep sound that alerts you to error conditions and informs you that operations have been completed. Press or to select a volume level (HIGH, LOW or OFF) and then press START/ ENTER .. ♦ Initial setting: LOW Setting 22: DIAL MODE This sets the dial mode. Select TONE if you are on a touch-tone line, or PULSE if you are on a pulse dial (rotary) line. Press or to make the selection and then press START/ ENTER . ♦ Initial setting: TONE Setting 23: QUICK ON-LINE When you transmit a multi-page document, this setting determines whether the machine will dial the receiving party and begin transmitting while scanning is still in progress, or wait until all pages have been scanned before dialing. Select ON to have the machine dial and begin transmission while scanning is still in progress, or OFF to have the machine wait until all pages have been scanned. Press or to make the selection and then press START/ ENTER . ♦ Initial setting: ON Setting 24: MULTI TTI If you are using Department Control, you can select ON to have the department name (the name associated with the department code entered by an operator to access the fax) appear at the top of each transmitted document. This will appear in place of the name entered in Entering Your Name and Fax Number in Chapter 1. Select OFF to turn Multi TTI off (the 7. Optional Settings 207