Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 226
Problems and Solutions
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Problems and Solutions The machine is on and data is received, but the data is not printed. (The DATA indicator blinks.) • Check to see if an error message appears in the display of the machine. • Is the specified size of paper loaded in the machine? Load paper or select another paper size. The machine cannot be selected from your computer. • Is the printer driver installed correctly? Install the printer driver correctly. Incorrect printing orientation • Is the orientation setting in the printer driver correct? Correct the orientation setting in the Paper tab of the printer driver. The printed image is clipped or off the edge of the paper. • Was a different paper size used? Select the same paper size as the document in the Paper tab of the printer driver, and make sure that correct size of paper is loaded in the selected source. • Make sure the orientation setting in the Paper tab of the printer driver is the same as the orientation of the original document. Printing stops in the middle of a print job. • Check the display of the machine to see if a message appears. Correct the problem indicated by the message. The paper specified in the • Make sure that the desired paper is set in the paper software application is not tray or cassette of the machine and select "Auto" used. for the paper source in the printer driver. 224