Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 69

2. Send/Receive Documents Dual-line Option (FO-DC600 only) Dual-line Option (FO-DC600 only) The dual line option (FO-60DL) allows your machine to be connected to a second telephone line. If you wish to use this option, consult your dealer to have the dual line kit installed. The dual-line option is only available on the FO-DC600. Note: The FO-60DL dual line option and the FO-NP1 network printer option cannot both be installed on the same machine. After your dealer installs the dual line kit, connect your second phone line to the LINE 2 jack. Caution: Do not insert the line into the port on the LAN board (if installed). This will damage the LAN board. LINE 2 ♦ Manual fax transmission (Normal Dialing using the SPEAKER key or an extension phone connected to the machine) and manual fax reception are only possible on Line 1. An extension phone connected to the machine uses Line 1. ♦ The machine will only ring when a call is received on Line 1. When a call is received on Line 2, the FAX 2 indicator will blink. Entering your name and fax numbers If you have the dual-line option, use the following procedure to enter your name (only one name can be entered) and the fax number of each line. This information will appear at the top of each fax page you send. 1 Press MENU and then or until ENTRY MODE is selected in the display. Display: MENU MODE 1:RECEIVE MODE 2:LISTING MODE 3:ENTRY MODE 67