Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 203

7. Optional Settings The optional settings allow you to customize the machine to better suit your needs. An initial setting has been made for each optional setting at the factory. To change a setting, follow the steps below to display the optional setting, and then select a new setting as explained in the pages that follow. 1 Press MENU and then or until OPTIONAL SETTING is selected in the display. Display: MENU MODE 1:RECEIVE MODE 2:LISTING MODE 3:ENTRY MODE 4: OPTIONAL SETTING 2 Press START/ ENTER . OPTIONAL SETTING MODE 01:DEFAULT FAX RESOLUTION 02:# OF RINGS AUTO RX 03:# OF RINGS MANUAL RX 04: AUTO LISTING 3 Press the numeric keys to enter the 2-digit number ("01" to "38") of the optional setting that you wish to change. (Note: You can also press the Rapid Key that has the same number as the optional setting.) Example: Optional Setting 01 0 1 OR Press or to scroll through the optional settings. When the desired optional setting appears, press START/ ENTER . 4 Enter a selection for the optional setting as explained in the following pages. 5 After entering a selection, the subsequent option setting will appear in STOP the display. To return to the date and time display, press twice. 201 7. Optional Settings