Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 154
If you are sending the document to e
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Broadcasting • Enter a full fax number with the numeric keys (max. 60 digits) and then press START/ ENTER . (Note: A maximum of 20 full fax numbers can be entered. Less can be entered if a large number of programs, timer operations, and/ or group keys have been stored.) • Press e-mail , enter an e-mail address, and then press START/ ENTER . (Only if the network scanner option is installed; maximum of 20 full addresses.) Note: If you need to delete a destination, press or to select the STOP destination and then press . Note: Scan to FTP and Scan to Desktop destinations cannot be selected. 4 Press START/ ENTER . 5 If desired, press RESOLUTION CONTRAST and/or to set the resolution and contrast. 6 If you are sending the document to only fax destinations, press START/ ENTER twice. Transmission will begin. If e-mail recipients are included in the destinations, press START/ ENTER once and go to Step 7. 7 Display when e-mail recipients If you are sending the document to e- have been selected: mail destinations, the display at right will appear to let you adjust the e-mail settings. To adjust a setting, press 1:START SCANNING 2:FROM XXX or to select the setting and 3:FILE FORMAT then press START/ ENTER (see Step 6 on page XXX 4:MESSAGE 89). NO MESSAGE When you are ready to send the document, select "START SCANNING" and press START/ ENTER . Note: If fax destinations have also been selected, the selections for the file format are "TIFF-G4" and "PDF-G4" (G3 cannot be used). 152