Sharp DC500 FO-DC500 FO-DC525 FO-DC600 Operation Manual - Page 212
Setting 32: BACKLIGHT SETTING, Setting 37: FAX TRANSFER
View all Sharp DC500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
Optional Settings to select NO and then press START/ ENTER . (Note that the function will turn off automatically if the selected paper source runs out of paper.) Note for FO-DC500: This setting is only available if your dealer has installed the paper cassette option. ♦ Initial setting: NO Note: If you turn off the Separate Mode setting, Option Setting 16 will subsequently appear in the display to allow you make an appropriate setting for cassette selection. If you don't make a selection, AUTO SELECTION will be automatically selected. Setting 32: BACKLIGHT SETTING Use this setting to set the amount of time until the display backlight turns off after the operation panel is used (after a key is pressed). Press or to select the amount of time (3 MINUTES, 10 MINUTES, or 15 MINUTES), or select ALWAYS OFF if you never want the backlight to be on. When finished, press START/ ENTER . ♦ Initial setting: 3 MINUTES Note: Settings 33 through 36 are not used. Setting 37: FAX TRANSFER This setting only appears if the network scanner option is installed. Select ALWAYS PRINT if you wish to have the machine print all faxes that are forwarded by the Inbound Routing function. Select PRINT ERROR ONLY to have the machine only print faxes that are not successfully forwarded. Press or to make the selection and then press START/ ENTER . ♦ Initial setting: ALWAYS PRINT 210