Sharp DX-B350P DX-B350P DX-B450P Operation Manual - Page 133
Close the Offset Catch Tray cover., Remove any jammed paper. If paper is torn
View all Sharp DX-B350P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
3. Close the Offset Catch Tray cover. At the Offset Catch Tray Clearing Paper Jams 4. Lift up the second lever from the top left corner of the back of the printer to open the rear cover. 5. Remove any jammed paper. If paper is torn, check for any remaining torn pieces of paper. The Fuser Unit is hot. Be careful not to touch it as you can get burned. Make sure that the levers at both ends of the Fuser Unit are returned to the positions they were in before clearing the jam. User's Guide 10-11
User’s Guide
10-11
At the Offset Catch Tray
Clearing Paper Jams
3.
Close the Offset Catch Tray cover.
4.
Lift up the second lever from the top left corner of the back of the printer to open the rear
cover.
5.
Remove any jammed paper. If paper is torn, check for any remaining torn pieces of paper.
The Fuser Unit is hot. Be careful not to touch it as you can get burned. Make sure that the levers
at both ends of the Fuser Unit are returned to the positions they were in before clearing the jam.