Sharp DX-B350P DX-B350P DX-B450P Operation Manual - Page 14

Paper Usage Getting to Know Your Printer Custom Sizes In addition to the standard sizes of paper you can use, you can also print on custom size paper from any tray. The custom size paper must meet the following guidelines. • All Custom sizes must be fed short edge first. • Paper smaller than 3 in by 5 in (76.2 mm by 127.0 mm) or larger than 8.5 in by 14 in (215.9 mm by 355.6 mm) cannot be printed. • Paper smaller than 3.5 in by 5.5 in (88.9 mm by 139.7 mm) must be printed from Tray 1 and cannot be duplexed or output to the Offset Catch Tray. Insert paper in the tray so the side to be printed is facing up and the short edge of the paper goes into the printer first. On the Operator Panel, use the Paper>Media Size/Type Menu to set Auto-Sense OFF and then set Custom Size for the intended tray. Then use your application software printer driver to send data to be printed on the installed custom size paper. See section "Custom Size Paper" on page 4-14.When using the EWS, turn Auto-Sense OFF and press Submit to gain access to Custom Size settings. Paper Types The printer supports the following paper types Paper Types Plain (64-105 gsm DX-B350P) (68-105 gsm DX-B450P) Transparency Pre-Punched Letter Head Color Pre-Printed Bond Labels Cardstock Postcard Envelope Thick 1 (106-159 gsm) Thick 2 (160-216 gsm) Fuser Mode Normal Transparency Normal Normal Normal Normal Thick1 Thick1 Thick2 Thick1 Thick1 for DX-B350P Thick3 for DX-B450P Thick1 Thick2 Restrictions None No duplex Half speed on DX-B450P None None None None None No duplex No duplex None No duplex Half speed on DX-B450P None None 2-6 User's Guide