Sharp MX-M200D Operation Manual - Page 36
Misfeed In Tray 2
View all Sharp MX-M200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
TROUBLESHOOTING AND MAINTENANCE MISFEED IN TRAY 2 Note • Make sure that there is no misfed paper in the tray before pulling it out. (Page 31) • Also use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit and the 2 x 250-sheet paper feed unit. 1 Open the side cover. Grasp the handle to open the side cover. 5 Gently push tray 2 into the machine. Push the tray in completely. Side cover 2 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 2 x 250-sheet paper feed unit (AR-D35) 3 If there was no misfed paper in step 2, pull out tray 2 and remove the misfed paper. Be careful not to tear the misfed paper during removal. Side cover 4 Gently close the side cover. The message " Clear paper path." will be cleared and copying will be possible. Note If the message does not clear, check again to make sure that no pieces of paper remain. 34