Sony DPT-S1 Operating Instructions - Page 15
Internal Memory Encryption, Tap [System Management]
View all Sony DPT-S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Internal Memory Encryption You may secure your content further by choosing to encrypt the internal memory. After internal memory encryption is enabled, you must enter your memory encryption password when powering on the device. 1 Press the (Home) button and tap [Settings]. 2 Tap [System Management] [Internal Memory Encryption] [Internal Memory Encryption] [Enable] [OK]. The device restarts. 3 Enter your password. You can enter between 6 and 20 alphanumeric characters and symbols as your memory encryption password. 4 Enter the password again to confirm and tap [OK]. Note All the data saved in the internal memory are deleted before memory encryption is enabled. Memory encryption results in 300 MB less available space in the internal memory. You cannot encrypt a microSD card. If you forget your password, contact the Sony Support Center. In order to disable the internal memory encryption, all the content on the device will be deleted. The deleted data cannot be restored. You cannot use the Tab key and Space key when entering the password. Tip When device lock and internal memory encryption are both enabled, upon startup you must enter your password for internal memory encryption as well as your password for device lock. Sony recommends that you create a backup in the computer for the documents you want to retain before encrypting internal memory. 15