Sony DPT-S1 Operating Instructions - Page 52

Performing Advanced Calibration You can rectify the gap in the position where the pen is aimed and the written position. Since there are individual differences in the Pen Grip Styles, please adjust as per your own style. 1 Press the (Home) button and tap [Settings]. 2 Tap [System Management]  [Pen Settings]  [Advanced Calibration]. Trial writing screen is displayed. 3 Trace the dotted line of  and  in the  area in the center of the screen using the pen with your usual grip style. The drawn line is not displayed on the dotted line when tracing. The drawn line will be displayed after moving the pen away. Moreover, a black line is displayed at the upper side of the  area when tracing. 4 Tap [Next]. Manual correction screen is displayed. 5 Move the written line by tapping the top-down- left-right arrow icons, adjusting it such that it matches the dotted line. 6 Tap [Next] when the position has more or less matched the dotted line. If you want to erase the line written here, tap [Erase]. Please trace on the dotted line in your usual writing style. Since the differences in the lines written here are adjusted on the subsequent screen, do not worry about the difference between the dotted lines and the written lines. The confirmation screen is displayed. 7 Trace the dotted line again, similar to Step 3. In case you still feel that there is a gap between the dotted lines and the written lines, tap [Recalibrate] to return to the previous screen. The written line will be displayed on the confirmation screen, adjust the position again similar to Step 5. Once the position adjustment is complete, tap [Next] to trace the dotted line. 52