Sony HVR1500A Product Manual (HVE-1500A Operating Manuals) - Page 17
When COMPOSITE/S is selected, Output signal display
View all Sony HVR1500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 1 Overview Note When an option board is required for signal input, the corresponding indicator does not light unless the option board is installed in the unit. • When HD VIDEO input is selected Video area display SG:HD HD SDI i.LINK:HDV Signal format HD test signal HD-SDI video signal 1) i.LINK compatible HDV format video/ audio signal 1) Downconverted signals (analog video output) are output from the VIDEO OUT connectors. • When SD VIDEO input is selected Video area display Signal format SG:SD SD test signal (factory default setting) COMPOSITE Composite video signal (optional HVBK-1505 board required) S VIDEO S video (separate Y/C) signal (optional HVBK-1505 board required) COMPONENT SD Y, R-Y, B-Y component signal (optional HVBK-1505 board required) SD SDI SD SDI (D1 format) video signal i.LINK:DV or i.LINK:DVCAM i.LINK compatible DVCAM/DV format video/audio signal 1) 1) The display follows the recording format setting in the REC FORMAT menu item (see page 76). • Audio The audio inputs for CH1 1/2 and CH2 3/4 can be selected respectively. The following table shows the relationship between the audio area indications and the signal selection. Indicator in audio area CH-1 1/2 (ANALOG, AES/ EBU, SDI, SG) Signal format The indicator corresponding to the signal format selected for audio input to channel 1 (when in 2-channel mode) or to channels 1 and 2 (when in 4-channel mode) lights. ANALOG: Analog audio signal (optional HVBK-1505 board required) AES/EBU: Digital audio signal in AES/ EBU format SDI: HD-SDI or SD-SDI format digital audio signal (according to the video input selection) SG: Audio test signal (factory default setting) Indicator in audio area CH-2 3/4 (ANALOG, AES/ EBU, SDI, SG) Signal format The indicator corresponding to the signal format selected for audio input to channel 2 (when in 2-channel mode) or to channels 3 and 4 (when in 4- channel mode) lights. ANALOG: Analog audio signal (optional HVBK-1505 board required) AES/EBU: Digital audio signal in AES/ EBU format SDI: HD-SDI or SD-SDI format digital audio signal (according to the video input selection) SG: Audio test signal (factory default setting) Note When i.LINK input is selected, the audio input signal is automatically input from the i.LINK connector, and no indicator is displayed in the audio area. e Output signal display Indicates the output video and audio signal format selected with the INTERFACE SELECT menu items (see page 85). Upper line: Video area (Indicates a format of the analog video output signals.) Lower line: Audio area (Indicates an audio channel output from the analog audio output connectors.) Video area indicators The indicator corresponding to the selected output analog video signal format lights. Indicator in video area COMPOSITE/S COMPONENT SD COMPONENT HD Signal format Composite video signal/S-video signal Y, R-Y and B-Y component SD video signals Y, Pr and Pb component HD video signals This selection determines the signals output from the Y/ CPST, Pr/R-Y/S-C, Pb/B-Y/S-Y and (SUPER) CPST connectors on the rear panel as follows. The superimposed text information output from the (SUPER) CPST connector can be set to ON (output) or OFF (do not output) with the CHARA. DISPLAY menu item (see page 77). • When COMPOSITE/S is selected Connectors Y/CPST Pr/R-Y/S-C Pb/B-Y/S-Y Output signal Composite video signal C signal Y signal 17 Names and Functions of Parts