Sony HVR1500A Product Manual (HVE-1500A Operating Manuals) - Page 48

Operation from an external device, Repeat playback - automatic cyclical playback

Page 48 highlights

Chapter 3 Recording and Playback Note A tape recorded in HDV format cannot be played back in reverse frame-by-frame or reverse slow mode. To set the maximum speed for fast forward and rewind when the F FWD or REW button is pressed Set the MAX SRCH SPEED >F.FWD/REW menu item to the desired maximum speed. Operation from an external device You can control this unit using a controller or editor equipped with an RS-422A interface connected to the REMOTE connector on the rear panel, a device connected to the HDV/DV connector, or a remote control unit (such as the DSRM-10) with SIRCS support connected to the CONTROL-S connector on the front panel. Note When controlling this unit from an external device, set the remote control switch on the front panel as follows. External device Setting of the remote control switch on this unit Editing unit connected to 9PIN REMOTE connector Remote control unit with LOCAL SIRCS support connected to CONTROL-S connector Device connected to i.LINK HDV/DV connector Variable speed playback when controlling from an external device When using an external controller or a remote control unit with SIRCS supports, the speed for variable speed playback corresponds to the tape format. Supported playback speeds for HDV format For a tape recorded in HDV 1080i format, the supported playback speeds and output image quality are shown in the following table. YES: output possible, NO: output not possible Playback speed ×24 ×8 ×1 ×1/5 ×1/10 ×1/30 Image quality Coarse Coarse Normal Normal Normal Normal Video output i.LINK output YES YES YES YES YES YES YES NO YES NO YES NO Playback speed Forward frame-byframe STILL ×-1 ×-8 ×-24 Image quality Normal Normal Coarse Coarse Coarse Video output i.LINK output YES NO YES YES YES YES NO YES YES YES Note Audio cannot be played back at variable speed for HDV format. Supported playback speeds for DV/DVCAM/ DVCPRO format The possible playback operations for DV/DVCAM/ DVCPRO format, and supported playback speeds are as follows. Playback operation Shuttle playback Frame-by-frame playback Digital slow-motion Still Playback speed -60 to +60 times normal speed (search audio can be checked in range of -10 to +10 times normal speed.) Low speed search, frame units -1/2 to +1/2 times normal speed (noiseless playback: audio slow playback possible using the digital jog sound function) Jog audio -1/2 to -1/30, +1/30 to +1/2 times normal speed Still image of desired field For details of how to carry out a search operation on an external device, refer to the operating instructions for the particular device. Repeat playback - automatic cyclical playback Proceed as follows to perform automatic cyclical playback of recording (repeat playback) between selected start and end points. 1 Set the desired repeat start and end points with the REPEAT FUNCTION menu item (see page 75). You can set points A and B as start and end points by following the procedure described in the next section. 2 Set the REPEAT FUNCTION >REPEAT MODE menu item (see page 75) to ON. 48 Playback

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111

48
Playback
Chapter 3
Recording and Playback
A tape recorded in HDV format cannot be played back in
reverse frame-by-frame or reverse slow mode.
To set the maximum speed for fast forward and
rewind when the F FWD or REW button is pressed
Set the MAX SRCH SPEED >F.FWD/REW menu item to
the desired maximum speed.
Operation from an external device
You can control this unit using a controller or editor
equipped with an RS-422A interface connected to the
REMOTE connector on the rear panel, a device connected
to the
HDV/DV connector, or a remote control unit (such
as the DSRM-10) with SIRCS support connected to the
CONTROL-S connector on the front panel.
When controlling this unit from an external device, set the
remote control switch on the front panel as follows.
Variable speed playback when controlling
from an external device
When using an external controller or a remote control unit
with SIRCS supports, the speed for variable speed
playback corresponds to the tape format.
Supported playback speeds for HDV format
For a tape recorded in HDV 1080i format, the supported
playback speeds and output image quality are shown in the
following table.
YES: output possible, NO: output not possible
Audio cannot be played back at variable speed for HDV
format.
Supported playback speeds for DV/DVCAM/
DVCPRO format
The possible playback operations for DV/DVCAM/
DVCPRO format, and supported playback speeds are as
follows.
For details of how to carry out a search operation on an
external device, refer to the operating instructions for the
particular device.
Repeat playback — automatic
cyclical playback
Proceed as follows to perform automatic cyclical playback
of recording (repeat playback) between selected start and
end points.
1
Set the desired repeat start and end points with the
REPEAT FUNCTION menu item
(see page 75)
.
You can set points A and B as start and end points by
following the procedure described in the next section.
2
Set the REPEAT FUNCTION >REPEAT MODE
menu item
(see page 75)
to ON.
Note
Note
External device
Setting of the remote control
switch on this unit
Editing unit connected to
REMOTE connector
9PIN
Remote control unit with
SIRCS support connected
to CONTROL-S connector
LOCAL
Device connected to
HDV/DV connector
i.LINK
Playback
speed
Image
quality
Video output
i.LINK
output
×24
Coarse
YES
YES
×8
Coarse
YES
YES
×1
Normal
YES
YES
×1/5
Normal
YES
NO
×1/10
Normal
YES
NO
×1/30
Normal
YES
NO
Forward
frame-by-
frame
Normal
YES
NO
STILL
Normal
YES
NO
×–1
Coarse
YES
YES
×–8
Coarse
YES
YES
×–24
Coarse
YES
YES
Note
Playback operation
Playback speed
Shuttle playback
–60 to +60 times normal speed
(search audio can be checked in
range of –10 to +10 times normal
speed.)
Frame-by-frame
playback
Low speed search, frame units
Digital slow-motion
–1/2 to +1/2 times normal speed
(noiseless playback: audio slow
playback possible using the
digital jog sound function)
Jog audio
–1/2 to –1/30, +1/30 to +1/2
times normal speed
Still
Still image of desired field
Playback
speed
Image
quality
Video output
i.LINK
output