Sony HVR1500A Product Manual (HVE-1500A Operating Manuals) - Page 84
Ch2 In Level [>> Ch2, Int Audio Sg [> Audio Sg]
View all Sony HVR1500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
AUDIO CONTROL [Audio]: Settings related to audio control Description of settings LEVEL SELECT [> Level Sel] REF LEVEL [>> REF Level]: Select the audio reference level (headroom) for recording on tape. *-20 dB [>>> -20dB]: Set to -20 dB. -18 dB [>>> -18dB]: Set to -18 dB. -16 dB [>>> -16dB]: Set to -16 dB. -12 dB [>>>-12dB]: Set to -12 dB. Notes • When the recording format is DV, the reference level is fixed at -12 dB. • When the system frequency is set to 50i, factory default setting value is set to -18 dB. CH1 IN LEVEL [>> CH1 input]: Select the audio level setting according to the audio level of the signal input to the AUDIO IN 1/3 connector. *+4 dB [>>> +4dB]: Set to +4 dB. 0 dB [>>> 0dB]: Set to 0 dB. -3 dB [>>> -3dB]: Set to -3 dB. -6 dB [>>> -6dB]: Set to -6 dB. Note -3 dB is displayed only when the system frequency is set to 50i. CH2 IN LEVEL [>> CH2 input]: Select the audio level setting according to the audio level of the signal input to the AUDIO IN 2/4 connector. *+4 dB [>>> +4dB]: Set to +4 dB. 0 dB [>>> 0dB]: Set to 0 dB. -3 dB [>>> -3dB]: Set to -3 dB. -6 dB [>>> -6dB]: Set to -6 dB. Note -3 dB is displayed only when the system frequency is set to 50i. OUTPUT LEVEL [>> Out *+4 dB [>>> +4dB]: Set to +4 dB. Level]: Select the analog 0 dB [>>> 0dB]: Set to 0 dB. audio output reference -3 dB [>>> -3dB]: Set to -3 dB. level. -6 dB [>>> -6dB]: Set to -6 dB. INT AUDIO SG [> Audio SG]: Select the operation of the internal audio test signal generator. JOG CONTROL [> Jog ctrl]: Select whether to adjust the audio playback speed during slow playback. Note -3 dB is displayed only when the system frequency is set to 50i. SILENCE [>> silence]: Generate a silence signal. *1kHz SINE [>> 1kHz]: Generate a 1-kHz sinewave signal at -20 dBFS. When audio input is set to SG in the video/audio input selection section on the front panel, the audio test signal generated by the internal audio test signal generator is input to the audio channels. OFF [>> OFF]: Do not adjust the audio playback speed. *ON [>> ON]: Adjust the audio playback speed. Note The setting of this menu item has no effect during playback of an HDV recorded tape. MUTING IN SHTL [> Shutl mute]: Select whether to suppress the audio output during shuttle playback. Note The setting of this menu item has no effect during playback of an HDV recorded tape. *OFF [>> OFF]: Do not suppress the audio output. CUEUP or PREROLL [>> CUEUP]: Suppress the audio output during cue-up or preroll operation. FULL [>> FULL]: Suppress the audio output during all shuttle playback operations. AUDIO EDIT [> Audio edit]: Specify the type of editing for audio signals. Note The setting of this menu item has no effect when the HDV format is used. *CUT EDIT [>> Cut edit]: Cut editing (Discontinuity in audio signal may result at editing points, causing noise during playback.) FADE IN/OUT [>> Fade]: Fade in and fade out IN OUT Chapter 7 Menus 84 Menu Contents