Sony HVR1500A Product Manual (HVE-1500A Operating Manuals) - Page 83
AUDIO CONTROL [Audio]: Settings related to audio, REC MODE [> REC mode]
View all Sony HVR1500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
VIDEO CONTROL [Video]: Settings related to video control Description of settings HD PROCESS CONTROL [> HD Process] ADJ RANGE [>> Adj range]: *-3 to +3(db) [>>> -3/+3]: -3 dB to +3 dB Select the adjustment WIDE [>>> wide]: -∞ to +3 dB range for video gain and chrominance gain. VIDEO GAIN [>> V gain]: Set the video output level. 000 [>>> 000] to 3FF [>>> 3FF] Factory default setting: *200H CHROMA GAIN [>> C gain]: 000 [>>> 000] to 3FF [>>> 3FF] Set the chrominance Factory default setting: *200H output level. CHROMA PHASE [>> C phase]: Set the chrominance phase. 00 [>>> 000] to FF [>>> FF] Factory default setting: *80H SETUP LEVEL [>> Setup 000 [>>> 000] to 3FF [>>> 3FF] lev]: Set the setup level. Factory default setting: *200H SYNC PHASE [> Sync Phase]: Adjust the sync phase. SYNC PHASE [>> Sync phs]: Adjust the SYNC+SC phase. 000 [>>> 000] to 3FF [>>> 3FF] Factory default setting: *Adjusted value at factory or 200H SUB CARRIER [>> SC phase]: Adjust the subcarrier phase. 000 [>>> 000] to 3FF [>>> 3FF] Factory default setting: *Adjusted value at factory or 200H INPUT BLANK [> Input blnk] LINE 335 [>> Line 335]: Select whether to blank Note line 335, or to output it as Displayed only when the part of the video signal. system frequency is set to 50i. *BLANK [>>> blank]: Blank. THROUGH [>>> through]: Output as a video signal. AUDIO CONTROL [Audio]: Settings related to audio control Description of settings REC MODE [> REC mode]: Select the audio recording mode. *2 CHANNEL (48kHz) [>> 2 ch]: 2-channel, 48-kHz mode 4 CHANNEL (32kHz) [>> 4 ch]: 4-channel, 32-kHz mode INPUT ARRANGE [> Input arng]: Make settings for input audio mixing. Notes • When, in 4-channel mode, analog audio is selected for all four channels (channels 1/2 and 3/4), the same analog audio signals are recorded on channels 1 and 3 and on channels 2 and 4, respectively. That is, the analog signal recorded on channel 1 is also recorded on channel 3 and the analog signal recorded on channel 2 is also recorded on channel 4. You can adjust the audio level on each of the four channels separately using the REC/PB LEVEL control knobs with the VARIABLE switch set to REC. • When i.LINK (HDV) input is selected, the setting of this menu item has no effect. Set the channels on which to record the input audio signals as follows. (1) Use the Mm