Yamaha Tyros4 Reference Manual - Page 12

Editable Parameters in the VOICE SET Displays The Voice Set parameters are organized into five different displays. The parameters in each display are described separately, below.  COMMON Page NOTE The available parameters differ depending on the Voice. [1 ] [2 ]/ [3 ] VOLUME TOUCH SENSE Adjusts the volume of the current edited Voice. Adjusts the touch sensitivity (velocity sensitivity), or how greatly the volume responds to your playing strength. TOUCH SENSE DEPTH Changes to velocity curve according to VelDepth (with Offset set to 64) TOUCH SENSE OFFSET Changes to velocity curve according to VelOffset (with Depth set to 64) Actual Velocity for tone generator Actual Velocity for tone generator Offset=96 (+64) Depth=127 (twice) Offset=127 (+127) 127 127 Depth=64 (normal) Offset=64 (normal) 64 64 Depth=32 (half) Depends on offset Offset=32 (-64) Depth=0 0 64 127 0 64 127 Received Velocity (Actual KeyOn speed) Depends on offset Received Velocity (Actual KeyOn speed) Offset=0 (-127) [4 ]/ [5 ] [6 ] [7 ] PART OCTAVE MONO/POLY PORTAMENTO TIME DEPTH: Determines the velocity sensitivity, or how much the level of the Voice changes in response to your playing strength (velocity). OFFSET: Determines the amount by which received velocities are adjusted for the actual velocity effect. Shifts the octave range of the edited Voice up or down in octaves. When the edited Voice is used as any of the RIGHT 1-3 parts, the R1/R2/R3 parameter is available; when the edited Voice is used as the LEFT part, the LEFT parameter is available. Determines whether the edited Voice is played monophonically or polyphonically. This setting can also be made from the VOICE EFFECT [MONO] button on the panel. Sets the portamento time (pitch transition time) when the edited Voice is set to "MONO" above. NOTE The Portamento Time determines the pitch transition time. Portamento is a function that creates a smooth transition in pitch from the first note played on the keyboard to the next.  CONTROLLER Page 1 MODULATION The MODULATION wheel can be used to modulate the parameters below as well as the pitch (vibrato). Here, you can set the degree to which the MODULATION wheel modulates each of the following parameters. [2 ] FILTER Determines the degree to which the MODULATION wheel modulates the Filter Cutoff Frequency. For details about the filter, see page 13. [3 ] AMPLITUDE Determines the degree to which the MODULATION wheel modulates the amplitude (volume). [5 ] LFO PMOD Determines the degree to which the MODULATION wheel modulates the pitch, or the vibrato effect. [6 ] LFO FMOD Determines the degree to which the MODULATION wheel modulates the Filter modulation, or the wah effect. [7 ] LFO AMOD Determines the degree to which the MODULATION wheel modulates the amplitude, or the tremolo effect. 12 Tyros4 Reference Manual