Yamaha Tyros4 Reference Manual - Page 130
MFC10 Settings, lamp of the MFC10 on.
UPC - 086792947280
View all Yamaha Tyros4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
MFC10 Settings The explanations here apply to the MFC10 Page in step 4 on page 124. By connecting an optional MFC10 MIDI Foot Controller to the Tyros4, you can conveniently control a wide range of operations and functions by using your feet-perfect for changing settings and controlling the sound while you perform live. Different functions can be assigned to each of the footswitches and up to five foot controllers (optional) can be connected to the MFC10, for additional sound-shaping possibilities. 1 Connect the MIDI IN terminal of the MFC10 to one of the MIDI OUT terminals of the Tyros4 by using a MIDI cable. MFC10 MIDI IN MIDI OUT If desired, connect additional foot controllers to the MFC10. 2 Set the MFC10 to the normal mode and turn the [FUNCTION] lamp of the MFC10 on. 3 Perform steps 1-4 on page 124 to call up the MFC10 Page. 4 Set the parameters on this display as desired. 4-1 4-5 4-6 5 4-2 4-3 4-4 On this display, two settings (below) can be made: • Each footswitch (F00-F29) on the MFC10 sends a note number to the Tyros4, and the Tyros4 determines how it responds to (which function is executed by) that note number. • Each foot controller on the MFC10 sends control change messages over a specific control change number to the Tyros4, and the Tyros4 determines how it responds to (which parameter is changed by) that control change number. 4-1 Use the [A]/[E] buttons to select "FOOTSWITCH" or "FOOT CONTROL- LER." NEXT PAGE 130 Tyros4 Reference Manual