ZyXEL NBG334W User Guide - Page 152
Bandwidth Management Monitor
View all ZyXEL NBG334W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Chapter 15 Bandwidth Management Configuration LABEL BW Budget Destination Address Destination Subnet Netmask Destination Port Source Address Source Subnet Netmask Source Port Protocol OK Cancel DESCRIPTION Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or minimum bandwidth allowed for the rule in kilobits per second. Enter the destination IP address in dotted decimal notation. Enter the destination subnet mask. This field is N/A if you do not specify a Destination Address. Refer to the appendices for more information on IP subnetting. Enter the port number of the destination. See Table 59 on page 147 for some common services and port numbers. Enter the source IP address in dotted decimal notation. Enter the destination subnet mask. This field is N/A if you do not specify a Source Address. Refer to the appendices for more information on IP subnetting. Enter the port number of the source. See Table 59 on page 147 for some common services and port numbers. Select the protocol (TCP or UDP) or select User defined and enter the protocol (service type) number. Click OK to save your customized settings. Click Cancel to exit this screen without saving. 15.10 Bandwidth Management Monitor Click Management > Bandwidth MGMT > Monitor to open the bandwidth management Monitor screen. View the bandwidth usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over the bandwidth budget for each rule. The gray section of the bar represents the percentage of unused bandwidth and the blue color represents the percentage of bandwidth in use. Figure 81 Management > Bandwidth MGMT > Monitor 152 NBG334W User's Guide