ZyXEL NBG334W User Guide - Page 211
Ppendix
View all ZyXEL NBG334W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
APPENDIX A Product Specifications and WallMounting Instructions The following tables summarize the NBG334W's hardware and firmware features. Table 95 Hardware Features Dimensions (W x D x H) 162 x 115 x 33 mm Weight 237g Power Specification Input: 120~240 AC, 50~60 Hz Output: 12 V AC 1 A Ethernet ports Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex mode. Auto-crossover: Use either crossover or straight-through Ethernet cables. 4-5 Port Switch A combination of switch and router makes your NBG334W a cost-effective and viable network solution. You can add up to four computers to the NBG334W without the cost of a hub when connecting to the Internet through the WAN port. You can add up to five computers to the NBG334W when you connect to the Internet in AP mode. Add more than four computers to your LAN by using a hub. LEDs PWR, LAN1-4, WAN, WLAN, WPS Reset Button The reset button is built into the rear panel. Use this button to restore the NBG334W to its factory default settings. Press for 1 second to restart the device. Press for 5 seconds to restore to factory default settings. Antenna The NBG334W is equipped with a 2dBi detachable antenna to provide clear radio transmission and reception on the wireless network. Operation Environment Temperature: 0º C ~ 40º C Humidity: 20% ~ 85% RH (Non-condensing) Storage Environment Temperature: -20º C ~ 60º C Humidity: 20% ~ 90% RH (Non-condensing) Distance between the centers of the holes on the device's back. 125 mm Screw size for wallmounting M3*10 Table 96 Firmware Features FEATURE DESCRIPTION Default IP Address 192.168.1.1 Default Subnet Mask 255.255.255.0 (24 bits) NBG334W User's Guide 211