ZyXEL NBG334W User Guide - Page 81
LABEL, DESCRIPTION, WPA2-PSK, Security Mode, Group Key Update Timer, WPA-PSK, WPA/WPA2, Group Key
View all ZyXEL NBG334W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Chapter 5 Wireless LAN The following table describes the labels in this screen. Table 31 Network > Wireless LAN > General: WPA/WPA2 LABEL DESCRIPTION WPA Compatible This check box is available only when you select WPA2-PSK or WPA2 in the Security Mode field. Select the check box to have both WPA2 and WPA wireless clients be able to communicate with the NBG334W even when the NBG334W is using WPA2-PSK or WPA2. ReAuthentication Specify how often wireless stations have to resend usernames and passwords in Timer (in seconds) order to stay connected. Enter a time interval between 10 and 9999 seconds. The default time interval is 1800 seconds (30 minutes). Note: If wireless station authentication is done using a RADIUS server, the reauthentication timer on the RADIUS server has priority. Idle Timeout The NBG334W automatically disconnects a wireless station from the wired network after a period of inactivity. The wireless station needs to enter the username and password again before access to the wired network is allowed. The default time interval is 3600 seconds (or 1 hour). Group Key Update Timer The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/ WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key management) sends a new group key out to all clients. The re-keying process is the WPA/WPA2 equivalent of automatically changing the WEP key for an AP and all stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer is also supported in WPA-PSK/WPA2-PSK mode. The NBG334W default is 1800 seconds (30 minutes). Authentication Server IP Address Enter the IP address of the external authentication server in dotted decimal notation. Port Number Enter the port number of the external authentication server. The default port number is 1812. You need not change this value unless your network administrator instructs you to do so with additional information. Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external authentication server and the NBG334W. The key must be the same on the external authentication server and your NBG334W. The key is not sent over the network. Accounting Server Active Select Yes from the drop down list box to enable user accounting through an external authentication server. IP Address Enter the IP address of the external accounting server in dotted decimal notation. Port Number Enter the port number of the external accounting server. The default port number is 1813. You need not change this value unless your network administrator instructs you to do so with additional information. Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external accounting server and the NBG334W. The key must be the same on the external accounting server and your NBG334W. The key is not sent over the network. Apply Click Apply to save your changes back to the NBG334W. Reset Click Reset to reload the previous configuration for this screen. NBG334W User's Guide 81