ZyXEL NBG334W User Guide - Page 84

Quality of Service QoS Screen

Page 84 highlights

Chapter 5 Wireless LAN Table 33 Network > Wireless LAN > Advanced LABEL DESCRIPTION Enable IntraBSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and a wired network client go through one access point (AP). Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless client A and B can access the wired network and communicate with each other. When Intra-BSS is disabled, wireless client A and B can still access the wired network but cannot communicate with each other. Output Power Set the output power of the NBG334W in this field. If there is a high density of APs within an area, decrease the output power of the NBG334W to reduce interference with other APs. 802.11 Mode Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate with the NBG334W. Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate with the NBG334W. Select 802.11b/g to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices to associate with the NBG334W. The transmission rate of your NBG334W might be reduced. Apply Click Apply to save your changes back to the NBG334W. Reset Click Reset to reload the previous configuration for this screen. 5.8 Quality of Service (QoS) Screen The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a priority level. Click Network > Wireless LAN > QoS. The following screen appears. 84 NBG334W User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272

Chapter 5 Wireless LAN
NBG334W User’s Guide
84
5.8
Quality of Service (QoS) Screen
The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a
priority level.
Click
Network
>
Wireless LAN
>
QoS
. The following screen appears.
Enable Intra-
BSS Traffic
A Basic Service Set (BSS) exists when all communications between wireless clients
or between a wireless client and a wired network client go through one access point
(AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is
enabled, wireless client
A
and
B
can access the wired network and communicate
with each other. When Intra-BSS is disabled, wireless client
A
and
B
can still access
the wired network but cannot communicate with each other.
Output Power
Set the output power of the NBG334W in this field. If there is a high density of APs
within an area, decrease the output power of the NBG334W to reduce interference
with other APs.
802.11 Mode
Select
802.11b
to allow only IEEE 802.11b compliant WLAN devices to associate
with the NBG334W.
Select
802.11g
to allow only IEEE 802.11g compliant WLAN devices to associate
with the NBG334W.
Select
802.11b/g
to allow either IEEE802.11b or IEEE802.11g compliant WLAN
devices to associate with the NBG334W. The transmission rate of your NBG334W
might be reduced.
Apply
Click
Apply
to save your changes back to the NBG334W.
Reset
Click
Reset
to reload the previous configuration for this screen.
Table 33
Network > Wireless LAN > Advanced
LABEL
DESCRIPTION