ZyXEL NBG334W User Guide - Page 214
Wall-mounting Instructions
View all ZyXEL NBG334W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Appendix A Product Specifications and Wall-Mounting Instructions Table 98 Standards Supported (continued) STANDARD DESCRIPTION IEEE 802.11b Uses the 2.4 gigahertz (GHz) band IEEE 802.11g Uses the 2.4 gigahertz (GHz) band IEEE 802.11d Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Bridges IEEE 802.11x Port Based Network Access Control. IEEE 802.11e QoS IEEE 802.11 e Wireless LAN for Quality of Service Microsoft PPTP MS PPTP (Microsoft's implementation of Point to Point Tunneling Protocol) MBM v2 Media Bandwidth Management v2 Wall-mounting Instructions Do the following to hang your NBG334W on a wall. " See the Figure 122 on page 215 for the size of screws to use and how far apart to place them. 1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall. 2 Drill two holes for the screws. Make sure the distance between the centers of the holes matches what is listed in the product specifications appendix. 1 Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the NBG334W with the connection cables. 5 Align the holes on the back of the NBG334W with the screws on the wall. Hang the NBG334W on the screws. 214 NBG334W User's Guide