Brother International MFC-7050C Users Manual - English - Page 63

Receiving Faxes Operation from Extension Telephone p. 6-6 and For FAX/TEL Mode Only p. 6-6 Setting Ring Delay The Ring Delay setting determines the number of times the MFC rings before it answers. If you have extension phones on the same line as the MFC, keep the Ring Delay default setting of 4. 1 Press Function , 1 , 2 , 1 . 2 Press or to select Ring Delay and press Set . 3 Press or to select how many times the line rings before the MFC answers (00-04) and press Set . (If you select 00, the line doesn't ring at all.) 4 Press Stop to exit. See Operation from Extension Telephone p. 6-6 Setting F/T Ring Time (For FAX/TEL Mode Only) If you set the answer mode to FAX/TEL, you'll need to determine how long the MFC will send you its special double ring when you have a voice call. This ringing happens after the initial ringing from your telephone company (Ring Delay). Only the MFC rings, for 20, 30, 40 or 70 seconds; no other phones on that number will ring the special double-ring. However, you can answer the call on any extension phone (in a separate wall jack) on the same phone number as the MFC. 1 Press Function , 1 , 2 , 2 . 2 Press or to select how long the MFC will ring to alert you that you have a voice call and press Set . RING TIME:20 SEC 3 Press Stop to exit. Now, when a call comes in and the MFC is set to FAX/TEL mode, all phones on this line will ring the number of times you selected in Ring Delay. You can let the MFC pick up and detect if it's a fax or voice call. If it's a fax call, the MFC prints the fax. If it's a voice call, the MFC signals you with a double ring for the length of time you selected in F/T Ring Time. Even if the caller hangs up during the double ringing, the MFC continues for the set time. SETUP RECEIVE 6-3