Canon VIXIA HF G50 Instruction Manual - Page 93
Rec Command] and [HDMI Time Code] to, HDMI Scan Mode] is
View all Canon VIXIA HF G50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Connecting to an External Monitor • If the connected monitor is not compatible with the signal output from the camcorder, then HDMI output will stop. • The time code signal will not be output from the HDMI OUT terminal in the following cases. - In mode. - When slow & fast motion recording is activated. - When the output is 720x480 / 59.94P. • The frames value in the time code will run from 0 to 29 instead of 0 to 23 in the following cases. - > [£ Display Setup] > [HDMI Scan Mode] is [ PsF (Forced 1080i)] and the frame 93 rate is 23.98P. - When the output is 1280x720. • You can set both > [3 Recording Setup] > [Rec Command] and [HDMI Time Code] to [i On] to use the camcorder's START/STOP button to control also the recording operation of an external recorder connected to the HDMI OUT terminal. The camcorder's time code signal will be output as well.