Dell PowerConnect 8100 Release Notes - Page 36

show crypto key mypubkey generates two error messages After generating DSA & RSA keys, executing the command "show crypto key mypubkey" generates the following error messages: APR 23 09:09:22 192.168.1.2-1 OSAPI[162603392]: osapi_file.c(657) 426 %% File close failed for descriptor 37 Resolved All 4.2 supported platforms APR 23 09:09:22 192.168.1.2-1 OSAPI[162603392]: osapi_file.c(657) 427 %% File close failed for descriptor 37 Web GUI ARP table does not match the CLI ARP table There is no impact on the keys themselves. The Web GUI does not display the static/local ARP entries. However, once an external port is linked up some, but not all, of the Static/local appear in the Web GUI. All ARP entries are now shown. All 4.2 supported platforms The copper auto negotiation process fails at 100mb FD and fails to link up PCM6220 Wrong information for current link status in port configuration page on the GUI PC8024 VLAN membership change on interface affects unrelated interface Implement dot1qVlanStatic Table in M8024-K Trunk mode native vlan implementation not compatible with Cisco PCM6220 Switch hangs when user tries to transfer a file from the flash to the server using sftp The copper ports 1-24 fail on 8024 to negotiate at 100Mb FD. The current stacking port status does not display "stacking link up" If user changes VLAN membership configuration on trunk port via the WEB he loses ports configuration on access ports and access ports are put into default VLAN. The dot1qVlanStaticTable is not available on M8024-k. Native vlan implementation is incompatible with Cisco. Switch will egress native vlan traffic as tagged and Cisco will drop ingress tagged native vlan traffic. Switch hangs and needs a hard reboot. 8024 copper ports negotiate to 100M FD. The web stack display has been updated to accurately reflect the correct information as well as address some style issues. Issue is resolved. the dot1qStaticVlanTable is implemented for the M8024-k Implementation of native vlan changed to be compatible with Cisco. None - issue is resolved. PC8024 All 4.2 supported platforms All 4.2 supported platforms All 4.2 supported platforms All 4.2 supported platforms All 4.2 supported platforms 34 System Firmware Version 5.1.0.1