Dell PowerConnect 8100 Release Notes - Page 46

Summary PFC sends packet after quanta extension received. CLI command "show ipv6 interface" does not paginate correctly. MOTD Banner appears at the wrong time. Summertime function running early. Switch does not save complete MST VLAN configuration. Switch failed to generate new RSA/DSA crypto keys. Banner MOTD configuration changes after reload. VLANs can get removed from running-config. Console session locks up. Fiber diagnostics reporting incorrect port type. BROADCOM-REF-MIB reporting incorrect values. User Impact Resolution This can cause FCOE failures when using PCM8024-k as a transit switch between some switches. A large number of interfaces cause information to scroll off the viewing area. Switch no longer sends packet after quanta extension received. Fixed the pagination for the command. MOTD and Login Banner is not visible before login for SSH users. The summertime function resets the time on the wrong week. The correct configuration was not being saved if there are more than 1K VLANs in a single MST instance. "Failed to generate RSA key." message was produced and keys were not generated. After reload a MOTD with an embedded! Character will be truncated. Creating vlans, assigning ports using the vlan membership detail page causes removal from running-config. CLI command "show interface detail portchannel1" locks up console session. When running fiber diagnostics, Ports 5, 7, 8, 13, 15, 16 report to be fiber ports and not copper ports. Incorrect Model numbers and revision date in BROADCOM-REF-MIB dellref.my Fixed the banner processing function. Corrected the function that returns the day of the week to account for particular months and leap years. Corrected the VLAN configuration buffer size. Fixed error condition when generating keys. Fix the MOTD engine to not ignore the leading '!' character. Corrected default VLAN checks when updating VLAN information. Corrected buffer overflow during "show interfaces detail" execution. Fixed reporting of valid copper ports. Model numbers which are described in dellref.my are corrected. Affected Platforms PCM8024-k All Platforms PCM6220 All Platforms PC8024 PCM8024 PCM8024 PCM8024 All Platforms All Platforms PC8024 PC70XX Switch crashes when full vlan range assigned to MST regions. Config Wizard causes iSCSI error messages. SSH configuration not restored after reboot. 1GB link being negotiated on 10GB Intel X520-KX4 No message logged for "Max number of SSH login sessions exceeded" VLAN web page not updating. When the full range of VLAN instances is assigned to a MST region the switch crashes. Using the config wizard to setup the PC8024 causes iSCSI error messages. The 'ip ssh protocol 2' is not being included in the running configuration. Some internal links on the Modular switches will not link at 10Gb. When the Max number of SSH sessions is reached no error is logged. When VLANs are removed using the web, the GUI doesn't display the ports that are members of the VLAN. Corrected VLAN instance buffer overflow. Correct the handling of iSCSI admin mode. Corrected the ability to place 'ip ssh protocol 2' in the running-config. Corrected the port mapping to allow proper port configuration. Added an error message. Corrected the fetch of current VLAN data. PCM6220 PC8024 All Platforms PCM8024 PCM8024-k All Platforms All Platforms 44 System Firmware Version 5.1.0.1