Dell PowerConnect 8100 Release Notes - Page 56
Release 4.1.1.9, Release 4.1.0.19
View all Dell PowerConnect 8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Release 4.1.1.9 No Updates Release 4.1.0.19 The following commands are supported on switches that have combo ports: Command media-type Syntax: media-type { auto-select [rj45 | sfp ] | rj45 | sfp } auto-select rj45 - utilize RJ45 media when both media types are active auto-select sfp - utilize the SFP media when both media types are active auto-select - return the selection to the default (auto-select sfp) rj45 - force connection on the RJ45 port. Power off SFP media port sfp - force connection on the SFP port. Power off RJ45 media port Default Configuration: The default is "media-type auto-select sfp" Command Mode: Interface Config mode Description: Select the media type for the interface. This command is only valid on combo ports. User Guidelines: When both media types are connected, the preference as determined by the auto-select keyword parameter selects the active media. When the auto-select keyword is not specified, the selected media type is powered on and the alternate media type is powered off. Note that when the auto-select keyword is used with any media type, the SFP port will remain powered and the laser, if any, will remain on in order to allow connections over the SFP port. Examples: ! Select the RJ45 port and power off the SFP port console(config-if-Te1/0/24)#media-type rj45 ! Prefer the RJ45 port and leave the SFP port powered on console(config-if-Te1/0/24)#media-type auto-select rj45 Command show interfaces media-type Syntax: show interfaces media-type Default Configuration: N/A Description: Display the configured and active media type for the combo ports 54 System Firmware Version 5.1.0.1