Dell PowerConnect 8100 Release Notes - Page 38

Line "no passive-interface Vl32" in startupconfig does not get loaded on startup The following is displayed when startupconfig is loaded: Applying Global configuration, please wait ... Applying Interface configuration, please wait ... Corrected stored config All 4.2 supported platforms ******* The following lines in "startupconfig" failed: ******* Line 57:: no passive-interface Vl32 Web GUI Admin Duplex setting on 10G Fiber ports Switching-->Port-->Port Configuration Select a ten gigabit interface Te1/0/1 and you can see that "Admin duplex" and "speed" are still active and can be changed, but when you apply it gives an error message saying " Error failed to set current auto negotiation with disable". Invalid selections disabled on page load. PCM6348 Advertise LLDP Management Address as IP Address assigned to OOB interface PCM6348 - Log message output Firmware missing port VLAN membership in the GUI LLDP advertises the switch's MAC address as the Management Address. Request to advertise the management IPv4 or IPv6 address instead. Messages repeated in the switch logs APR 28 19:39:22 10.1.208.10-1 STATSMGR[239558880]: collector.c(1066) 3445 %% Failure in function collectorGet APR 28 19:39:22 10.1.208.10-1 STATSMGR[239558880]: presenter.c(102) 3446 %% ERROR!! Failure in preStatsGet 0x0002011e APR 28 16:40:31 10.1.208.10-1 ARP[301140128]: ipmap_arp_api.c(855) 3325 %% Received ARP Reply on interface Vl208 with bad target IP address 255.255.255.255. Sender IP is 10.1.209.60, sender MAC is 76:f7:b9:cf:06:7e. Port VLAN membership will not be shown in the GUI. The following behavior is now implemented: 1) Will advertise service port address if it is there 2) If service port is not there, then will send network address 3) If both of the above are not there and if it is routing interface will send IP address of the routing interface 4) If none of the above not there, will send MAC address. SNMP walk/gets on counters for CPU/vlan routing ports not supported by platform no longer log a warning message Web code updated to display VLAN membership All 4.2 supported platforms All 4.2 supported platforms PCM6220 36 System Firmware Version 5.1.0.1