Dell PowerConnect J-SRX210 Hardware Guide - Page 114
Configuring Basic System Properties
View all Dell PowerConnect J-SRX210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
PowerConnect J-SRX210 Services Gateway Hardware Guide Configuring Basic System Properties Table 37 on page 98 through Table 39 on page 99 provide the summary of configuration details for initial setup. Table 37: Basic Configuration Summary (Device Identification) Field Function Your Action Host Name Defines the hostname of the services gateway. Type the hostname. Domain Name Defines the network or subnetwork that the services gateway belongs to. Type the domain name. Root Password (required) Sets the password that user root can use to log in to the services gateway. Type a plaintext password that the system encrypts. NOTE: After a root password has been defined, it is required when you log in to the J-Web user interface or the CLI. Verify Root Password (required) Verifies the root password has been Retype the password. typed correctly. DNS Name Servers Specifies a DNS server that the services gateway can use to resolve hostnames into addresses. Add an IP address by selecting it in the box to the left of the Add button, then clicking Add. Delete an IP address by clicking it in the box above the Add button, then clicking Remove. Domain Search Adds each domain name that includes the services gateway to the configuration so that each domain is included in a DNS search. Add a domain name by typing it in the box to the left of the Add button, then clicking Add. Delete a domain name by , clicking it in the box above the Add button, then clicking Remove. Table 38: Basic Configuration Summary (Management Access) Field Function Your Action Default Gateway Defines a default gateway through which to direct packets addressed to networks not explicitly listed in the routing table. Type a 32-bit IP address in dotted decimal notation. Loopback Address Defines a reserved IP address that is always available on the services gateway. If no address is entered, this address is set to 127.0.0.1/32. Type a 32-bit IP address and prefix length in dotted decimal notation. 98