Dell PowerConnect J-SRX210 Hardware Guide - Page 164
RJ-45 Connector Pinouts for the J-SRX210 Services Gateway Ethernet Port
View all Dell PowerConnect J-SRX210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
PowerConnect J-SRX210 Services Gateway Hardware Guide RJ-45 Connector Pinouts for the J-SRX210 Services Gateway Ethernet Port The Ethernet ports on the front panel are autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the services gateway to a management LAN (or other device that supports out-of-band management). Figure 27 on page 148 shows the RJ-45 cable connector. Figure 27: Ethernet Cable Connector (RJ-45) Table 48 on page 148 describes the RJ-45 connector pinouts for the Ethernet port. Table 48: RJ-45 Connector Pinouts for the Services Gateway Ethernet Port Pin Signal 1 TX+ 2 TX - 3 RX+ 4 Termination network 5 Termination network 6 RXD 7 Termination network 8 Termination network Related Topics • Interface Cable and Wire Specifications for the J-SRX210 Services Gateway on page 147 • RJ-45 Connector Pinouts for the J-SRX210 Services Gateway Console Port on page 148 • J-SRX210 Services Gateway Front Panel and Back Panel Views on page 9 RJ-45 Connector Pinouts for the J-SRX210 Services Gateway Console Port The port on the front panel labeled console is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an RJ-45 cable for connecting the services gateway to a management LAN (or other device that supports out-of-band management). Figure 28 on page 149 shows the RJ-45 connector pinouts for the console port. 148