Dell PowerConnect J-SRX210 Hardware Guide - Page 80
Preparing the J-SRX210 Services Gateway for Wall-Mount Installation
View all Dell PowerConnect J-SRX210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
PowerConnect J-SRX210 Services Gateway Hardware Guide • Preparing the J-SRX210 Services Gateway for Rack-Mount Installation on page 62 • Preparing the J-SRX210 Services Gateway for Wall-Mount Installation on page 64 Preparing the J-SRX210 Services Gateway for Wall-Mount Installation You can mount a J-SRX210 Services Gateway on a wall. The four rubber feet attached to the chassis provide stability. Table 29 on page 64 provides the list of tasks you need to perform before installing the device. Table 29: J-SRX210 Services Gateway Preinstallation Checklist for Wall-Mount Installation Task Additional Information Verify that the site meets the requirements. "Site Preparation Checklist for the J-SRX210 Services Gateway" on page 45 Remove the services gateway chassis from the shipping carton. "Unpacking the J-SRX210 Services Gateway" on page 57 Verify that you have the following parts available in your wall-mounting kit to mount the J-SRX210 Services Gateway on wall: • Wall-mounting brackets • Screws NOTE: The wall-mounting kit is not shipped with the device and must be ordered separately. Related Topics • Site Preparation Checklist for the J-SRX210 Services Gateway on page 45 • Unpacking the J-SRX210 Services Gateway on page 57 • Preparing the J-SRX210 Services Gateway for Rack-Mount Installation on page 62 • Preparing the J-SRX210 Services Gateway for Desk-Mount Installation on page 63 64