Dell PowerConnect J-SRX210 Hardware Guide - Page 90
Replacing or Installing Mini-Physical Interface Modules in the J-SRX210 Services Gateway
View all Dell PowerConnect J-SRX210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
PowerConnect J-SRX210 Services Gateway Hardware Guide Replacing or Installing Mini-Physical Interface Modules in the J-SRX210 Services Gateway Mini-Physical Interface Modules (Mini-PIMs) are circuit boards that you can install in a device for enhanced functionality based on your requirements. They enable you to easily add or change physical interfaces on a device. The Mini-Physical Interface Module (Mini-PIM) slot is covered with a blank faceplate to maintain proper airflow through the services gateway. Before installing the Mini-PIM, you must remove the faceplate. See the J-SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide for information about installing the Mini-PIMs. NOTE: The Mini-PIMs available on the J-SRX210 Services Gateway are not hot-swappable. You need to power off the device before removing or installing Mini-PIMs. Related Topics • J-SRX210 Services Gateway Installation Safety Guidelines and Warnings on page 125 • Installing the J-SRX210 Services Gateway on a Desk on page 70 • Installing the J-SRX210 Services Gateway on a Wall on page 72 • Installing the J-SRX210 Services Gateway in a Rack on page 67 74