Dell PowerConnect J-SRX210 Hardware Guide - Page 31
Table 10: J-SRX210 Services Gateway Built-In Hardware, Interfaces
View all Dell PowerConnect J-SRX210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 2: J-SRX210 Services Gateway Hardware Components and Specifications Table 10: J-SRX210 Services Gateway Built-In Hardware Interfaces (continued) Interface Type Specifications Description Fast Ethernet Universal Serial Bus (USB) • Consist of six fixed ports • Are labeled as port fe-0/0/2 to port fe-0/0/7 on the front panel • Provide link speeds of 10/100 Mbps • Operate in full-duplex and half-duplex modes The first two Fast Ethernet ports support Power over Ethernet on the J-SRX210 Services Gateway (PoE version and media gateway version). The Fast Ethernet ports can be used as follows: • To provide LAN connectivity to hubs, switches, local servers, and workstations • To forward incoming data packets to the device • To receive outgoing data packets from the device • To connect power devices to receive network connectivity and electric power (PoE functionality) (For the PoE and media gateway model of the J-SRX210 Services Gateway) • Consist of two ports • Function in full speed and high speed • Are compliant with USB revision 2.0 The USB ports can be used as follows: • To support a USB storage device that functions as a secondary boot device in case of the internal flash failure on startup, if the USB storage device is installed and configured NOTE: You must install and configure the USB storage device on the USB port to use it as secondary boot device. Also, the USB device must have JUNOS installed. • To provide the USB interfaces that are used to communicate with many types of USB storage devices compatible with JUNOS Software. Contact your Dell customer service representative for more information. 15