Dell PowerConnect J-SRX210 Hardware Guide - Page 99
Connecting the J-SRX210 Services Gateway to Management Devices, Connecting a J-SRX210
View all Dell PowerConnect J-SRX210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
CHAPTER 15 Connecting the J-SRX210 Services Gateway to Management Devices This chapter includes the following topics: • Connecting a J-SRX210 Services Gateway to the J-Web Interface on page 83 • Connecting a J-SRX210 Services Gateway to the CLI Locally on page 85 • Connecting a J-SRX210 Services Gateway to the CLI Remotely on page 86 • Connecting the Modem at the J-SRX210 Services Gateway End on page 87 • Connecting the Modem to the Console Port on the J-SRX210 Services Gateway on page 88 • Connecting to the CLI at the User End for the J-SRX210 Services Gateway on page 89 Connecting a J-SRX210 Services Gateway to the J-Web Interface If you plan to use the J-Web interface to configure the J-SRX210 Services Gateway, you must connect through one of the built-in Ethernet management ports. When the services gateway is powered on for the first time, the system looks for a DHCP server. If it does not find one, the system assigns an IP address within the 192.168.1.0/24 subnetwork to any devices connected to the system. To connect to the J-Web interface through any of the ports ge-0/0/1 or fe-0/0/2 to fe-0/0/7 on the services gateway, see Figure 24 on page 84. 83