Dell PowerConnect J-SRX210 Hardware Guide - Page 85

J-SRX210 Services Gateway Rack Installation - Hanging

Get Dell PowerConnect J-SRX210 PDF manuals and user guides View all Dell PowerConnect J-SRX210 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

Chapter 12: Installing the J-SRX210 Services Gateway Figure 16: J-SRX210 Services Gateway Rack Installation - Positioning Power Supply Adapter Tray J-SRX210 4. Have one person grasp the sides of the device, lift it, and position it in the rack. 5. Align the bottom hole in each mounting bracket with a hole in each rack rail as shown in Figure 17 on page 69, making sure the chassis is level. Figure 17: J-SRX210 Services Gateway Rack Installation - Hanging the Services Gateway in a Rack J-SRX210 6. Have a second person install a mounting screw into each of the two aligned holes. Use a number-1 Phillips screwdriver to tighten the screws. 7. Install the second screw in each mounting bracket. 8. Verify that the mounting screws on one side of the rack are aligned with the mounting screws on the opposite side and that the device is level. 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
Figure 16: J-SRX210 Services Gateway Rack Installation — Positioning
Power Supply Adapter Tray
J-SRX
J-SRX
210
210
4.
Have one person grasp the sides of the device, lift it, and position it in the rack.
5.
Align the bottom hole in each mounting bracket with a hole in each rack rail as shown
in Figure 17 on page 69, making sure the chassis is level.
Figure 17: J-SRX210 Services Gateway Rack Installation — Hanging the
Services Gateway in a Rack
J-SRX
J-SRX
210
210
6.
Have a second person install a mounting screw into each of the two aligned holes.
Use a number-1 Phillips screwdriver to tighten the screws.
7.
Install the second screw in each mounting bracket.
8.
Verify that the mounting screws on one side of the rack are aligned with the mounting
screws on the opposite side and that the device is level.
69
Chapter 12: Installing the J-SRX210 Services Gateway