Dell PowerConnect J-SRX240 Hardware Guide - Page 144
RJ-45 Connector Pinouts for the J-SRX240 Services Gateway Ethernet Port
View all Dell PowerConnect J-SRX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
PowerConnect J-SRX240 Services Gateway Hardware Guide RJ-45 Connector Pinouts for the J-SRX240 Services Gateway Ethernet Port The Ethernet ports on the front panel are autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the services gateway to a management LAN (or other device that supports out-of-band management). Figure 16 on page 128 shows the RJ-45 cable connector. Figure 16: Ethernet Cable Connector (RJ-45) Table 41 on page 128 describes the RJ-45 connector pinouts for the Ethernet port. Table 41: RJ-45 Connector Pinouts for the Services Gateway Ethernet Port Pin Signal 1 TX+ 2 TX - 3 RX+ 4 Termination network 5 Termination network 6 RXD 7 Termination network 8 Termination network Related Topics • Interface Cable and Wire Specifications for the J-SRX240 Services Gateway on page 127 • RJ-45 Connector Pinouts for the J-SRX240 Services Gateway Console Port on page 128 • RJ-11 Connector Pinouts for the J-SRX240 Services Gateway with Integrated Convergence Services FXO and FXS Ports on page 129 RJ-45 Connector Pinouts for the J-SRX240 Services Gateway Console Port The port on the front panel labeled console is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an RJ-45 cable for connecting the services gateway to a management LAN (or other device that supports out-of-band management). Figure 17 on page 129 shows the RJ-45 connector pinouts for the console port. 128