Dell PowerConnect J-SRX240 Hardware Guide - Page 79
Connecting the J-SRX240 Services Gateway to Management Devices, Connecting the J-SRX240
View all Dell PowerConnect J-SRX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
CHAPTER 13 Connecting the J-SRX240 Services Gateway to Management Devices This chapter includes the following topics: • Connecting the J-SRX240 Services Gateway to the J-Web Interface on page 63 • Connecting the J-SRX240 Services Gateway to the CLI on page 66 • Connecting the Modem at the J-SRX240 Services Gateway End on page 68 • Connecting the Modem to the Console Port on the J-SRX240 Services Gateway on page 69 • Connecting to the CLI at the User End for the J-SRX240 Services Gateway on page 69 Connecting the J-SRX240 Services Gateway to the J-Web Interface If you plan to use the J-Web interface to configure the services gateway, you must connect through one of the built-in Gigabit Ethernet management ports. When the services gateway is powered on for the first time, the system looks for a DHCP server. If it does not find the system, the system assigns an IP address within the 192.168.1.0/24 subnetwork to any devices connected to gateway. To connect to the J-Web interface through port 0 on the services gateway, see Figure 13 on page 64. 63