Dell PowerConnect J-SRX240 Hardware Guide - Page 152
Packing the J-SRX240 Services Gateway and Components for Shipment
View all Dell PowerConnect J-SRX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
PowerConnect J-SRX240 Services Gateway Hardware Guide The J-SRX240 Services Gateway has a serial number ID label located on the back of the chassis and an agency label on the bottom of the chassis as shown in Figure 18 on page 136. Figure 18: Location of J-SRX240 Serial Number and Agency Labels Mini-Physical Interface Module Serial Number Label Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable on the J-SRX240 Services Gateway. Each Mini-PIM has a unique serial number. The serial number label is located on the right side of the Mini-PIM, when the Mini-PIM is horizontally oriented (as it would be installed on the device). The exact location might be slightly different on different Mini-PIMs, depending on the placement of components on the Mini-PIM. Packing the J-SRX240 Services Gateway and Components for Shipment Packing the Services Gateway To pack the services gateway for shipment: 1. Retrieve the shipping carton and packing materials in which the device was originally shipped. If you do not have these materials, contact your Dell Support representative about approved packaging materials. 2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis or to an outside ESD point if the device is disconnected from earth ground. 136