Dell PowerConnect J-SRX240 Hardware Guide - Page 95
Table 31: Basic Configuration Summary
View all Dell PowerConnect J-SRX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 14: Performing Initial Software Configuration on the J-SRX240 Services Gateway Table 31: Basic Configuration Summary (continued) Field Function Your Action Default Gateway Defines a default gateway through which to direct packets addressed to networks not explicitly listed in the routing table. Type a 32-bit IP address in dotted decimal notation. Loopback Address Defines a reserved IP address that is always available on the services gateway. If no address is entered, this address is set to 127.0.0.1/32. Type a 32-bit IP address and prefix length in dotted decimal notation. Allow Telnet Access Allows remote access to the services gateway using Telnet. Enable Telnet access by selecting the box. Allow JUNOScript over Clear-Text Access Allows JUNOScript to access the services gateway using a protocol for sending unencrypted text over a TCP connection. Enable JUNOScript access over cleartext by selecting the box. Allow SSH Access Allows remote access to the services gateway using SSH. Enable SSH access by selecting the box. Date and Time Time Zone Identifies the time zone in which From the list, select the the services gateway is located. appropriate time zone. NTP Servers Specifies an NTP server that the services gateway can reach to synchronize the system time. Add an IP address by clicking Add and in the box enter IP address, then click OK. Delete an IP address by clicking it in the box and then clicking Delete. 79