Dell S2825cdn Users Guide - Page 109
Paper Density, Adjust Transfer Belt Unit, Adjust 2nd BTR, Adjust Fusing Unit, Color Reg Adjust - black toner
View all Dell S2825cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
❚ Admin Settings > Maintenance Use the Maintenance menu to initialize the non-volatile (NV) memory, configure the plain paper quality adjustment settings, and configure the security settings. ❚ Admin Settings > Maintenance > Paper Density Specifies paper density settings. ❚ Admin Settings > Maintenance > Adjust Transfer Belt Unit Adjusts the transfer bias when the faint image of the previous page, a part of the page currently printing, etc. appear on the output. K Offset YMC Offset If faint black colored ghosts appear, try to decrease the value. If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease the value. ❚ Admin Settings > Maintenance > Adjust 2nd BTR NOTE: • The print quality changes depending on the setting values you select for this item. Specifies the transfer roller voltage adjustment for each paper type. If you see mottles on the print output, try to increase the voltage. If you see white spots on the print output, try to decrease the voltage. For details about the setting values, see "Adjust 2nd BTR." ❚ Admin Settings > Maintenance > Adjust Fusing Unit NOTE: • The print quality changes depending on the setting values you select for this item. Adjusts the temperature setting of the fusing unit for each paper type. When the printouts are curled, try to lower the temperature. When the toner does not fuse on the paper properly, try to increase the temperature. For details about the setting values, see "Adjust Fusing Unit." ❚ Admin Settings > Maintenance > Color Reg Adjust Auto Correct Automatically performs color registration correction. ❚ Admin Settings > Maintenance > Clean Developer and Transfer Unit Stirs the developer in the drum cartridge and cleans the transfer unit. Understanding the System Menus | 109