Dell S2825cdn Users Guide - Page 385

Tray1/Optional 550-Sheet Feeder Multi-feed Jam Problem Print media multiple-feeds occur in tray1 or optional 550-sheet feeder. Action 1 Make sure that tray1 or the optional 550-sheet feeder is properly inserted. If using coated paper, proceed to step 2a. If using other type of print media, proceed to step 2b. 2a Load coated paper one sheet at a time. If the problem persists, proceed to step 3. 2b Use print media that is not damp. If the problem persists, proceed to step 3. 3 Fan the print media. If the problem persists, proceed to step 4. 4 Wipe the retard roller in tray1 or the optional 550-sheet feeder where the multi-feed occurred with a cloth moistened with water. If the problem persists, contact Dell. Multipurpose Feeder (MPF) Multi-feed Jam Problem Print media multiple feeds occur in the MPF. Action 1 Check the media type you are using. If using coated paper, proceed to step 2a. If using other type of print media, proceed to step 2b. 2a Load coated paper one sheet at a time. If the problem persists, proceed to step 3. 2b Use print media that is not damp. If the problem persists, proceed to step 3. 3 Fan the print media. If the problem persists, proceed to step 4. 4 Wipe the retard roller in the MPF where the multi-feed occurred with a cloth moistened with water. If the problem persists, proceed to step 5. 5 Decrease the number of print media to be loaded to the MPF. If the problem persists, contact Dell. Noise Problem The printout has noise. Action 1 To specify the cause of the noise, perform the Auto Registration Adjustment. If the problem persists, proceed to step 2. 2 Replace the waste toner box. See "Replacing the Waste Toner Box." If the problem persists, proceed to step 3. 3 Replace the drum cartridges. See "Replacing the Drum Cartridges." If the problem persists, proceed to step 4. 4 Replace the toner cartridge (K). See "Replacing the Toner Cartridges." If the problem persists, proceed to step 5. Troubleshooting | 385