Dell S2825cdn Users Guide - Page 235

The Server Address page appears. 4 Enter the information as follows to fill in the fields. Name Server Type Server Address Share Name Server Path Server Port Number Enter a name of your choice. This appears as the name for the Server Address in the address book. Select FTP to send documents to an FTP server. Select SMB to send documents to a shared folder on your computer using Server Message Block (SMB). Enter the name or IP address of the server or computer. Example: • For FTP: Server name: abc.example.com (abc: host name, example.com: domain name) IP address: 192.0.2.1 • For SMB: Computer name: abc IP address: 192.0.2.1 Enter the name of the shared folder. See "Creating a Shared Folder (SMB Only)." For SMB only. • Example: Share, Sharefolder Enter the path of the sub-folder within the shared folder. If you have not created a sub-folder, leave this blank. When entering the sub-folder path, make sure that the sub-folder is already created. Do not enter the name of the shared folder. Example: Shared Folder name: MyShare, Second-level folder name: MyPic Enter "MyPic". If you have created a sub-folder within a sub-folder, separate each sub-folder name with a backslash (SMB) or forward slash (FTP). Example: Shared Folder name: MyShare, Second-level folder name: MyPic, Third-level folder name: John • For SMB enter "MyPic\John". • For FTP enter "MyPic/John". Enter the Server Port Number. If you are unsure, you can enter the default value of 21 for FTP or 139 for SMB. Available ports are: FTP: 21, 5000 - 65535 SMB: 139, 445, 5000 - 65535 Scanning | 235