Dell S2825cdn Users Guide - Page 116

❚ Tray Management > Tray Settings > MPF Specifies the paper loaded in the Multipurpose Feeder (MPF). Display Tray Prompt MPF Mode Use Panel Settings Use Printer Driver Settings Manual Size Type Select the checkbox to display a popup message that prompts to set paper type and paper size when paper is loaded in the MPF. The factory default is on (selected). Uses the paper size and type specified on the operator panel. Uses the paper size and type specified on the print driver. When the print job is started, the printer pauses the job and shows the screen to prompt the user to load the paper of the specified size and type. To continue the job, check that the specified paper is loaded, and then tap Continue in the screen on the touch panel. Specifies the paper size. Specifies the paper type. ❚ Tray Management > Tray Settings > Tray1 Specifies the paper loaded in tray1. Display Tray Prompt Size Type Select the checkbox to display a popup message that prompts to set the paper type and paper size when paper is loaded in tray1. The factory default is on (selected). Specifies the paper size. Specifies the paper type. NOTE: • For details about supported paper sizes, see "Supported Print Media." ❚ Tray Management > Tray Settings > Tray2 NOTE: • The Tray2 setting is available only when the optional 550-sheet feeder is installed. Specifies the paper loaded in the optional 550-sheet feeder. Display Tray Prompt Size Type Select the checkbox to display a popup message that prompts to set the paper type and paper size when paper is loaded in the optional 550-sheet feeder. The factory default is on (selected). Sets whether to specify the paper size automatically or manually. Specifies the paper type. ❚ Tray Management > Tray Priority Sets the priority order of the paper trays for automatic tray selection. If paper trays loaded with the same paper size and type exists, the paper tray is selected according to this priority order. 116 | Understanding the System Menus