Dell S2825cdn Users Guide - Page 154

Transmission Defaults Redial Attempts Interval of Redial Resend Delay Tone/Pulse Prefix Dial Prefix Dial Number Fax Cover Page Fax Header ECM Modem Speed Fax Reports Display Manual Fax Recipients Fax Activity Fax Transmit Fax Broadcast Fax Protocol Scan Defaults Creates your own default scan settings. Sets the number of redial attempts to make if the destination fax number is busy. If you enter 0, the printer does not redial. Sets the interval between redial attempts. Sets the interval between re-send attempts. Sets whether to use tone or pulse dialing. Sets whether to set a prefix dial number. Sets a prefix dial number of up to five digits. This number dials before any auto dial number is started. It is useful for accessing the Private Automatic Branch Exchange (PABX). Sets whether to attach a cover page to faxes. Sets whether to print the information of the sender on the header of faxes. Sets whether to enable the Error Correction Mode (ECM). To use the ECM, the remote machines must also support the ECM. Allows you to adjust the fax modem speed when a fax transmission or reception error occurs. Sets whether to show the fax number of the recipient on the Sending Fax screen when manually sending a fax. Sets whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications. Sets whether to print a transmission report after every fax transmission or only when an error occurs. Sets whether to print a transmission report after every fax transmission to multiple destinations or only when an error occurs. Sets whether to print the protocol monitor report after every fax transmission or only when an error occurs. 154 | Dell™ Printer Configuration Web Tool