Dell S2825cdn Users Guide - Page 92

Ad-hoc, WPS Setup, IP Mode, TCP/IP, Con s TCP/IP settings.

Page 92 highlights

❚ Admin Settings > Network > Wi-Fi > Wi-Fi Setup Wizard > Manual SSID Setup > SSID > Ad-hoc Selects to configure the wireless setting without the access point such as a wireless router. No Security WEP Transmit Key Configures the wireless setting without specifying the encryption type from WEP. Specifies the WEP key to use through the wireless network. For 64bit keys, up to 10 hexadecimal characters can be entered. For 128bit keys, up to 26 hexadecimal characters can be entered. Specifies the transmit key from WEP Key 1 - 4. ❚ Admin Settings > Network > Wi-Fi > WPS Setup NOTE: • WPS Setup is available only when the printer is connected using the wireless network. • WPS Setup is available on Dell H625cdw and Dell H825cdw. Configures the wireless network using WPS. Push Button Configuration PIN Code Configures the wireless setting with Wi-Fi Protected Setup-Push Button Configuration (WPS-PBC) . Configures the wireless setting using the PIN code assigned by the printer. You can also print the PIN code. Check it when entering PIN assigned to the printer into your computer. ❚ Admin Settings > Network > Wi-Fi > IP Mode Configures the IP mode. Dual Stack IPv4 Mode IPv6 Mode Uses both IPv4 and IPv6 to set the IP address. Uses IPv4 to set the IP address. Uses IPv6 to set the IP address. ❚ Admin Settings > Network > Wi-Fi > TCP/IP Configures TCP/IP settings. Get IP Address AutoIP IP Address BOOTP RARP DHCP Panel Sets the IP address automatically. A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the network is set as the IP address. The subnet mask is set as 255.255.0.0. Sets the IP address using BOOTP. Sets the IP address using RARP. Sets the IP address using DHCP. Use this option when you want to set the IP address manually on the operator panel. When an IP address is being set manually, the IP is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address. 92 | Understanding the System Menus

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372
  • 373
  • 374
  • 375
  • 376
  • 377
  • 378
  • 379
  • 380
  • 381
  • 382
  • 383
  • 384
  • 385
  • 386
  • 387
  • 388
  • 389
  • 390
  • 391
  • 392
  • 393
  • 394
  • 395
  • 396
  • 397
  • 398
  • 399

92
|
Understanding the System Menus
Admin Settings > Network > Wi-Fi > Wi-Fi Setup Wizard > Manual SSID Setup >
SSID >
Ad-hoc
Selects to configure the wireless setting without the access point such as a wireless
router.
Admin Settings > Network >
Wi-Fi >
WPS Setup
NOTE:
WPS Setup is available only when the printer is connected using the wireless network.
WPS Setup is available on Dell H625cdw and Dell H825cdw.
Configures the wireless network using WPS.
Admin Settings > Network >
Wi-Fi >
IP Mode
Configures the IP mode.
Admin Settings > Network >
Wi-Fi >
TCP/IP
Configures TCP/IP settings.
No Security
Configures the wireless setting without specifying the
encryption type from WEP.
WEP
Specifies the WEP key to use through the wireless
network. For 64bit keys, up to 10 hexadecimal characters
can be entered. For 128bit keys, up to 26 hexadecimal
characters can be entered.
Transmit Key
Specifies the transmit key from
WEP Key 1
-
4
.
Push Button Configuration
Configures the wireless setting with Wi-Fi Protected Setup-Push
Button Configuration (WPS-PBC) .
PIN Code
Configures the wireless setting using the PIN code assigned by the
printer. You can also print the PIN code. Check it when entering PIN
assigned to the printer into your computer.
Dual Stack
Uses both IPv4 and IPv6 to set the IP address.
IPv4 Mode
Uses IPv4 to set the IP address.
IPv6 Mode
Uses IPv6 to set the IP address.
Get IP Address
AutoIP
Sets the IP address automatically. A random value in the
range of 169.254.1.0 to 169.254.254.255 that is not
currently in use on the network is set as the IP address.
The subnet mask is set as 255.255.0.0.
BOOTP
Sets the IP address using BOOTP.
RARP
Sets the IP address using RARP.
DHCP
Sets the IP address using DHCP.
Panel
Use this option when you want to set the IP address
manually on the operator panel.
IP Address
When an IP address is being set manually, the IP is
allocated to the printer using the format
nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127
and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.