Dell S2825cdn Users Guide - Page 74
When Using the Operator Panel, Tools, Admin Settings, Network, Panel Lock Control, Enable, Ethernet
![]() |
View all Dell S2825cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
4 Click Configure the IP address settings Next. 5 Follow the on-screen instructions until the Configure Printer screen appears. 6 Click Advanced. 7 Specify the IP address settings according to your network environment. 8 Click Next, and then follow the on-screen instructions. When Using the Operator Panel 1 Press the (Information) button. 2 Tap the Tools tab Admin Settings Network. If Panel Lock Control is set to Enable, enter the password. See "Panel Lock." 3 Perform either of the following: If the printer is connected to a network with the Ethernet cable: Tap Ethernet. For Dell H625cdw and Dell H825cdw: If the printer is connected to a wireless network: Tap Wi-Fi. 4 Tap IP Mode IPv4 Mode OK. 5 Tap until TCP/IP appears, and then tap TCP/IP Get IP Address. 6 Select how the IP address is assigned. • To set the IP address automatically, select AutoIP, DHCP, BOOTP, RARP, or Panel, and then click OK. Proceed to step 7. • To set the IP address manually, select Panel, and then click OK. Perform the following: a Tap IP Address. The cursor is located at the first octet of the IP address. b Use the number pad to enter the first octet of the IP address, and then tap . 74 | Setting the IP Address
![](/manual_guide/products/dell-s2825cdn-users-guide-df456cc/74.png)