Dell S2825cdn Users Guide - Page 315
Invalid SMB share name. Tap, Status-Code, What you can
View all Dell S2825cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
Status-Code 016-766 016-767 016-768 016-786 016-790 016-799 016-930 016-931 016-985 016-986 024-965 024-966 024-969 026-721 027-446 027-452 031-521 031-522 031-523 031-524 031-525 031-526 What you can do The e-mail exceeds the SMTP server size restriction. Tap Close, or wait for 60 seconds for the printer to recover. Contact the SMTP server administrator. The e-mail address of the recipient is incorrect. Tap Close, or wait for 60 seconds for the printer to recover. Check e-mail address, and then try scanning again. The e-mail address of the sender is incorrect. Tap Close, or wait for 60 seconds for the printer to recover. Check e-mail address, and then try scanning again. A timeout error occurs when sending or receiving scanned data. Tap Close, or wait for 60 seconds for the printer to recover. Check if the Ethernet cable is connected properly. If there is no problem with the Ethernet cable, contact server administrator. Network connection error. IP address is not determined. Tap Close, or wait for 60 seconds for the printer to recover. Check if the Ethernet cable is connected properly. If there is no problem with the Ethernet cable, contact server administrator. Tap Close to clear the message and cancel the current print job. Check the configuration of the printer on the print driver. The device is not supported. Remove it from the front USB port. The USB hub is not supported. Remove it from the front USB port. Tap Close, or wait for 60 seconds for the printer to recover. Retry scanning by lowering the resolution setting or changing the file format of the scanned data. Make sure that the size and type specified in the tray settings matches the size and type of paper loaded in the tray. Check your USB flash drive: • If the file size or the number of files exceeds the limit of your USB flash drive. • If your USB flash drive is not write-protected. Change the IPv6 address to avoid duplication. Turn off the printer, and then turn it on again. Change the IPv4 address to avoid duplication. Turn off the printer, and then turn it on again. SMB server login error. Tap Close, or wait for 60 seconds for the printer to recover. Check login-able computer with your system administrator. SMB server login error. Tap Close, or wait for 60 seconds for the printer to recover. Check if login name (domain name and user name) and password are correct. Invalid SMB share name. Tap Close, or wait for 60 seconds for the printer to recover. Check the share name you specified. Exceeded the SMB server user account limit. Tap Close, or wait for 60 seconds for the printer to recover. Check the number of users who use the server at the same time is not exceeding the upper limit. SMB destination client permission error. Tap Close, or wait for 60 seconds for the printer to recover. Check if the specified user can read and write file at the storage location. Unable to resolve the SMB server hostname. Tap Close, or wait for 60 seconds for the printer to recover. Check DNS connection, or check if forwarding destination server is registered with DNS. Understanding Printer Messages | 315